Smart gate barriers

The product adopts the unique crank-rocker mechanism design in the industry, with high
transmission efficiency and low transmission impact.
Quick response of remote control, barrier arm up and down moves smoothly. The movement of the mechanism with minimal vibration is safe and reliable.

Integrated MQTT protocol controller allows for direct integration into any IoT server.

Features

  • Speed of open and close speed can choose 1~4 seconds.

Barrier Gate Speed:

  • 1s barrier: carbon fiber boom (3meter);
  • 1s barrier: round straight arm/round articulated arm ≤3.5m;
  • 2s barrier: round straight arm/round articulated arm≤4m,;
  • 3s barrier: round straight arm/round articulated arm≤4.5m;
  • 4s barrier: long elliptical arm≤6m.

Anti-smashing: If the barrier arm receives a input trigger signal during the falling process, it will immediately raise the arm. During the triggering period, the arm will not fall, and the arm will fall automatically after the input is restored.

Automatically Lift the Arm When Power Off: barrier arm will automatically raised for car out in case of power off, to ensure the smooth flow of the vehicle access.

Electric spray, anti-rust, non-fading, dust-proof and waterproof grade meets the requirements of outdoor IP54 level.

Using a unique crank-rocker mechanism design, transmission impact is small, and the
service life of the barrier is at least 10 Million cycle.

High-performance geared motor, maintenance-free, no current impact when locked rotor, with overheating self-protection function, which can effectively protect the controller and extend the service life of the controller.

Using DC motor with driver, long life, precise limit, good starting and speed regulation performance, wide speed regulation range, strong overload capacity, and little influence by electromagnetic interference.

The barrier gate control panel has built-in high-sensitive rise priority and pressure resistance rebound functions. The control panel integrates ground sensing loop detector and infrared anti-smashing sensors, and can also be adapted to anti-smashing arm with pressure wave detection.

Rebound function in case of resistance: barrier arm immediately lifts the lever after encountering external force during the fall process, with high sensitivity.

Anti-collision function of the barrier arm: After the car hits the barrier arm at a speed of 15 km/h, the barrier rod is knocked out, and other structural parts such as the main shaft of the barrier will not be deformed or damaged. After the barrier is reinstalled, the barrier can operate normally

Specifications

Control interfaceTCP/IP network interface
Serial RS-485 interface
ProtocolMQTT
Open API
Input VoltageAC 220V±10%/50HzMax. Power≤350W
Working Temperature-30℃~+70℃Average Power≤250W
Working Humidity<95%(Non-condensing)Noise≤65dB
Open/Close Speed1-4s optionalIP ClassIP54
Casing MaterialCold-rolled Sheet galvanized
Powder coated
DirectionLeft/Right
Barrier Arm TypesRound Straight Arm carbon fiber
round articulated arm carbon fiber
long elliptical arm carbon fiber
Weight50kg
Dimension293(L)361(W)1050(H)mmOperation Life cycle≥10,000,000
Anti-smash TypeLoop sensor, infra-red sensor
carbon fiber arm break at nobs every 2 meters
Max. Current13A
Barrier Arm speed1s barrier: carbon fiber boom(3 meters); round straight arm/round articulated arm ≤3.5m;
2s barrier: round straight arm/round articulated arm≤4m;
3s barrier: round straight arm/round articulated arm≤4.5m;
4s barrier: long elliptical arm≤6m.
DC Motor24VDC