OpenPark Gateways

OpenPark Gateways are industrial appliances that are installed on-site to establish local communication with the diverse sensor and actuators, run OpenPark engine software, provide local web dashboard and synchronize all data with the OpenPark Cloud.

OpenPark Gate controller to integrate License plate recognition camera with OpenPark Gate barrier to open for registered cars and control a LED traffic sign with Green Arrow or Red Cross. It also provides remote control through software interface from web back-office or from Mobile app.

It is optionally integrated into the OpenPark Entry and Exit Terminals

  • Intel® i5-i7 Processors
  • 1x DDR3L SO-DIMM
  • 1x HDMI and 1xDP for display output
  • 1x GbE LAN for Ethernet
  • 4x USB 3.0, 2x USB 2.0 for USB device connection
  • 4x RS232/422/485 for serial device connection
  • 1x SATA 3.0 HDD / SSD for storage
  • 1x M.2 Key A for Wi-Fi / Bluetooth expansion

The OGC is integrated as an option for the Entry or Exit Terminal. In case LPR is required (OGC-002)

If not LPR is required, the OGC-01 is only required with integrated barrier control function.

Order information

OP-EGC-01OpenPark IP Access Controller

OP-EGC-02:              Entry gate controller with LPR CPU

Traffic counters

OpenPark gate entry and exit terminal are also counting the traffic through the server registration of entry/exit events and the number of available spaces is then calculated. On other locations in the parking lot, OpenPark IOT data collector / controller can also be connected to loop detectors in pairs to perform directional counting and report to the server. The pair of loops will allow for direction awareness and the controller will send the pulses to OpenPark Gate Controller to synchronize with OpenPark Parking Management cloud application.

Order information

OP-EGC-03:                OpenPark Counting Controller

Datasheets

Download datasheets from our downloads page